| |
 |
|
|
|
Product
Code No. |
Description |
Threaded
Inlet
Connection |
'K' Factor |
Spray
Angle In
Degree |
Material
Of Construction |
Finish |
| SSE-SN-M-01 |
½” Size |
BSP
BSPT
NPT |
24, 28, 31,
36, 41, 45,
51, 57, 61,
66, 71, 76,
81, 86, 91 |
60,75,80,
90,100,110,
120,140,180 |
Forged Brass
|
Natural
Crome Plated |
| SSE-SN-M-02 |
¾” Size |
|
| |
|
|
Product
Code No. |
Description |
Threaded
Inlet
Connection |
'K' Factor |
Spray
Angle In
Degree |
Material
Of Construction |
Finish |
| SSE-SN-H-01 |
¾” Size |
BSP
BSPT
NPT |
18
25
32
47 |
75
80
85
90 |
Brass
S.S 304 |
Natural
Crome Plated |
| SSE-SN-H-02 |
¾” Size |
|
| |
|
|
|
UL Listed |
|
Made out of bronze |
|
Maximum Working pressure 175 PSI |
|
|
| |
| Product Code No. |
Description |
Inlet
Connection |
Finish |
| SSE-AS-P-57 |
Rated Temp 57° |
½” NPT
½” PT |
Natural
Cromeplated |
| SSE-AS-P-68 |
Rated Temp 68° UL Listed |
| SSE-AS-P-79 |
Rated Temp 79° UL Listed |
| SSE-AS-P-93 |
Rated Temp 93° |
| SSE-AS-P-141 |
Rated Temp 141° |
|
| |
|
|
|
UL Listed |
|
Made out of bronze |
|
Maximum Working pressure 175 PSI |
|
|
| |
| Product Code No. |
Description |
Inlet
Connection |
Finish |
| SSE-AS-UP-57 |
Rated Temp 57° |
1/2” NPT
1/2” PT |
Natural
Cromeplated |
| SSE-AS-UP-68 |
Rated Temp 68°
UL Listed |
| SSE-AS-UP-79 |
Rated Temp 79°
UL Listed |
| SSE-AS-UP-93 |
Rated Temp 93° |
| SSE-AS-UP-141 |
Rated Temp 141° |
|
| |
|
|
|
Made out of bronze |
|
Maximum Working pressure 175 PSI |
|
|
| |
| Product Code No. |
Description |
Inlet
Connection |
Finish |
| SSE-AS-SW-57 |
Rated Temp 57° |
½” NPT
½” PT |
Natural
Cromeplated |
| SSE-AS-SW-68 |
Rated Temp 68°
UL Listed |
| SSE-AS-SW-79 |
Rated Temp 79° UL Listed |
| SSE-AS-SW-93 |
Rated Temp 93° |
| SSE-AS-SW-141 |
Rated Temp 141° |
|
| |
|
It is two-piece type adjustable type with pendent sprinkler to provide low profile decorativesprinkler. Two-piece design allows the installation and testing of sprinkler prior to installation of the ceiling. Outer Cap can remove and re-install allowing access above removable ceiling panels for servicing building equipment without shutting down the sprinkler system and removing the removing the sprinkler the slip-on feature allows for minor adjustments due to pipe or ceiling pitch. |
|
|
Discharge Rate : 22 GPM |
|
Maximum Working pressure 150 PSI |
|
Nominal Temp. : 68° |
|
Radius of effective coverage : 2.3 meter |
|
Hole dia Require In ceiling : 60 to 70 mm |
|
Fusible Metal : Tin Alloy about 60° |
|
|
| |
| Product Code No. |
Description |
| SSE-AS-C-68 |
As Above |
|
| |
|
|
|
UL listed |
|
Made out of Cast Iron |
|
Rated pressure 175 PSI |
|
Test Pressure 350 PSI |
|
|
| |
| Product Code No. |
Description |
| SSE-DV-01 |
2” Threaded Connection Horizontal Pattern |
| SSE-DV-02 |
2” Flanged Connections Horizontal Pattern |
|
| |
|
|
|
UL listed |
|
Made from Cast Iron |
|
Rated pressure 175 PSI |
|
Test Pressure 350 PSI |
|
|
| |
| Product Code No. |
Description |
| SSE-AV-01 |
4” Flanged Connection Vertical Installed |
| SSE-AV-02 |
6” Flanged Connection Vertical Installed |
|
| |
|
|
As widely used for regular building and always having water in the inlet and outlet six of the alarm valve, wet pipe sprinkler system enables prompt fire suppression in case of fire. |
|
| |
|
|
|
Dongaflex sprinkler drops are designed to significantly reduce labour and installation costs. |
|
Available in 5 different lengths with either a 1/2" or 3/4" NPT on reducer thread. |
|
Dongaflex has been tested and listed by underwriters laboratories and approved by FM, United States and Canada, per NFPA 13, i3R & 130 as well as UL 1474 standards for safety regarding, but not limited to pressure cycling, corrosion resistance, flow characteristics, vibration resistance, leakage and mechanical as well as hydrostatic strength. |
|
DONGAFLEX is an active member of AFSA, NFPA and NFSA. |
|
|
|
|
| |
